Dell PowerFlex v3.6.x CLI Reference Guide

Notes

Journal capacity is defined as a percentage of the total storage capacity in the Storage Pool and must equal at least 28 GB per SDR. In general, journal capacity should be at least 5% of replicated usable capacity in the Protection Domain, including volumes used as source and targets. It is important to assign enough storage capacity for the replication journal. For detailed instructions on calculating journal capacity, see "SDR journal capacity" in the Getting to Know Dell PowerFlex Guide.

Syntax

scli --set_replication_journal_capacity (((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) | --storage_pool_id <ID>) --replication_journal_capacity_max_ratio <RATIO>)

Parameters

--protection_domain_id <ID>

Protection Domain ID

--protection_domain_name <NAME>

Protection Domain name

--storage_pool_name <NAME>

Storage Pool name

--storage_pool_id <ID>

Storage Pool ID

--replication_journal_capacity_max_ratio <RATIO>

Maximum capacity percentage to be allocated for journal capacity (from 0 to 100).