Dell PowerFlex v3.6.x CLI Reference Guide

Alerts thresholds are calculated from each Storage Pool capacity after deducting the defined amount of spare capacity. You can set thresholds for a single Storage Pool or for all Storage Pools.

Syntax

scli --set_capacity_alerts_threshold --capacity_high_threshold <PERCENT> --capacity_critical_threshold <PERCENT> (--all_storage_pools | --system_default | (((--protection_domain_id <ID> | --protection_domain_name <NAME>) --storage_pool_name <NAME>) |--storage_pool_id <ID>))

Parameters

--capacity_high_threshold <PERCENT>

Threshold of the non-spare capacity of the Storage Pool that will trigger a high-priority alert, expressed as a percentage

--capacity_critical_threshold <PERCENT>

Threshold of the non-spare capacity of the Storage Pool that will trigger a critical-priority alert, expressed as a percentage

--protection_domain_id <ID>

Protection Domain ID

--protection_domain_name <NAME>

Protection Domain name

--storage_pool_name <NAME>

Storage Pool name

--storage_pool_id <ID>

Storage Pool ID

--all_storage_pools

Thresholds apply to all Storage Pools

--system_default

Thresholds apply to newly created Storage Pools