Dell PowerFlex v3.6.x CLI Reference Guide

If your system is using Restricted SDC mode, this command also prevents an SDC’s access to the MDM. (Its approved status is removed.) As a result, volumes cannot be mapped to the SDC.

If the SDC is currently connected to the MDM, the command will fail, and the connection will be maintained. The command will also fail if the SDC has volume mapping.

Syntax

scli --remove_sdc (--sdc_id <ID> | --sdc_name <NAME> | --sdc_guid <GUID> | --sdc_ip <IP>)

Parameters

--sdc_id <ID>

SDC ID. To obtain the ID, query the SDC using the query_all_sdc, or view the SDC’s properties in the PowerFlex GUI.

--sdc_name <NAME>

SDC name

--sdc_guid <GUID>

SDC Global Unique Identifier. To obtain the GUID, query the SDC using the query_all_sdc, view the SDC’s properties in the PowerFlex GUI, or run the drv_cfg --query_guid command locally from /opt/emc/scaleio/sdc/bin (root access permission required).

--sdc_ip <IP>

SDC IP address