Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerFlex v3.6.x CLI Reference Guide

PDF

modify_management_ip

Modify an MDM node’s management IP addresses.

If you are using this command to add additional management IP addresses, you must enter all of the existing IP addresses in the command, and add the new ones at the end. Up to four IP addresses are supported.

Syntax

scli --modify_management_ip (--new_mdm_management_ip <IP> | --clear_all) (--target_mdm_id <ID> | --target_mdm_ip <IP> [--target_mdm_port <PORT>] | --target_mdm_name <NAME>) 
  [--allow_duplicate_management_ips]
  [--i_am_sure] 

Example

scli --modify_management_ip --target_mdm_id 0x34e8f1df6c84a410 --new_mdm_management_ip fd00::192:168:1:17,10.103.110.17

Implementing the changes

After modifying MDM IP addresses, ensure that you implement the change in all components and interfaces that are mapped to the MDM:

  1. PowerFlex GUI: In the Login window, log in using the new IP address, then clear the old IP address from the history if it is now obsolete.
  2. REST Gateway and OpenStack: In the REST Gateway, modify the mapping to the new management IP address.
  3. On each SDC, perform the following locally, in command line with root access permissions:
    • If for any reason, the management IP address is not updated in the SDC, run:
       /opt/emc/scaleio/sdc/bin/drv_cfg --mod_mdm_ip
    • If the SDC is mapped to more than one PowerFlex system, run:
      /opt/emc/scaleio/sdc/bin/drv_cfg --add_mdm
  4. vSphere: Using the vSphere web plug-in interface, unregister PowerFlex and reregister it with the new IP address.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\