Dell PowerFlex v3.6.x CLI Reference Guide

The file is used to obtain security certificates from a Certificate Authority and is saved in the specified MDM’s directory:

• Linux: /opt/emc/scaleio/mdm/cfg
• Windows: C:\Program Files\emc\scaleio\mdm\cfg

Syntax

scli --generate_mdm_csr_file (--target_mdm_id <ID> | --target_mdm_ip <IP> [--target_mdm_port <PORT>] | --target_mdm_name <NAME>) 
  [OPTIONS]

Parameters

--target_mdm_id <ID>

ID of the MDM for which the certificate and private key are required

--target_mdm_ip <IP>

IP address of the MDM for which the certificate and private key are required

--target_mdm_port <PORT>

Port of the MDM for which the certificate and private key are required

--target_mdm_name <NAME>

Name of the MDM for which the certificate and private key are required

--common_name <NAME>

Common name to appear in the CSR. The default is the machine’s host name.

Options

NOTE:If you use any of these options, the default values will be disabled for all of them.

--country <NAME>

Country to appear in the CSR

--state <NAME>

State to appear in the CSR

--location <NAME>

Location to appear in the CSR

--organization <NAME>

Organization to appear in the CSR

--organizational_unit <NAME>

Organizational unit to appear in the CSR

--email_address <EMAIL>

Email address to appear in the CSR