Jumper settings
To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated on the system board.
Table 1. Jumper settingsThe following table displays the system board jumper settings.
Jumper
|
Setting
|
Description
|
PSWD
|
Default
|
Short: Default
Open: Clear Password
|
RTCRST
|
Default
|
Open: Default
Short: Real-time clock reset. Can be used for troubleshooting
|
SERVICE_MODE
|
Default
|
Open: Default
Short: ME disable
|
Data is not available for the Topic