Precision 7960 Rack Service Manual

Installing the memory module

If you are replacing a component, remove the existing component before performing the installation procedure.

The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.

Installing the memory module

Align the notch on the memory module with the tab on the memory-module slot.
Press the memory module down with your thumbs until the securing clips firmly click into place.
NOTE:If you do not hear the click, remove the memory module and reinstall it.
CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge(ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.

NOTE:AMD graphics cards cannot tie to memory over and including 1 TB.