You can use the Integrated Devices screen to view and configure the settings of all integrated devices
including the video controller, integrated RAID controller, and the
USB ports.
About this task
You can view
the Integrated Devices screen by clicking System Setup Main Menu > System BIOS > Integrated Devices.
The Integrated Devices screen details are explained below.
Menu Item
Description
USB 3.0 Setting
Enables or disables the USB 3.0 support. Enable this option only
if your operating system supports USB 3.0. If you disable this option,
devices operate at USB 2.0 speed. USB 3.0 is set to Auto by
default
User Accessible USB Ports
Enables or disables the USB ports. Selecting Only Back
Ports On disables the front USB ports, selecting All Ports Off disables all USB ports. The USB keyboard
and mouse operates during boot process in certain operating systems.
After the boot process is complete, the USB keyboard and mouse do
not work if the ports are disabled.
NOTE:Selecting Only Back Ports On and All Ports Off will disable the USB management port and also restrict access to
iDRAC features.
Internal USB Port
Enables or disables the internal USB port. By default, the option
is set to Enabled.
Integrated Network Card 1
Enables or disables the integrated network card.
I/OAT DMA Engine
Enables or disables the I/OAT option. Enable only if the hardware
and software support the feature.
Embedded Video Controller
Enables or disables the Current state of Embedded Video
Controller . By default the option Disabled. Current State of Embedded Video Controller is a read only field, indicating the current state for the Embedded
Video Controller. If the Embedded Video Controller is the only display
capability in the system (that is, no add-in graphics card is installed),
then the Embedded Video Controller is automatically used as the primary
display even if the Embedded Video Controller setting is Disabled.
NOTE:1. If the embedded video controller is DISABLED in BIOS and if you launch the Virtual Console
from the iDRAC, the Virtual Console Viewer is blank.
NOTE:2.
All monitors must be plugged into the GPU at power on, and must remain
plugged into the GPU until the system is booted into the operating
system with the driver loaded. Once the system is booted into the
operating system the monitor can be unplugged, and then hot plugged. The
monitor will not be hot pluggable unless this process is followed.
DP cable can be hot plugged
mDP cable can be hot plugged
DVI cable can be hot plugged
DP to VGA dongle cable cannot be hot plugged
Current State of Embedded Video Controller
Displays the current state of the Embedded Video Controller. Current State of Embedded Video Controller is a read only field, indicating the current state for the Embedded
Video Controller
SR-IOV Global Enable
Enables or disables the BIOS configuration of Single Root I/O
Virtualization (SR-IOV) devices. By default, the SR-IOV
Global Enable option is set to Disabled.
OS Watchdog Timer
If your system stops responding, this watchdog timer aids in the
recovery of your operating system. When this field is set to Enabled, the operating system is allowed to initialize
the timer. When the option is set to Disabled (the default), the timer will have no effect on the system.
Memory Mapped I/O above 4GB
Enables or disables the support for PCIe devices that require
large amounts of memory. By default, the option is set to Enabled.
Slot Disablement
Enables or disables the available PCIe slots on your system. The Slot Disablement feature controls the configuration of
PCIe cards installed in the specified slot. Slot disablement must
be used only when the installed peripheral card is preventing booting
into the operating system or causing delays in system startup. If
the slot is disabled, both the Option ROM and UEFI driver are disabled.
This field controls the configuration of the card installed in the
slot. You can set one of the following options for each of the .....(Press
F1 for more information)
Slot 1 Boot Driver
Enabled (default)
Disabled
Slot 2 Boot Driver
Enabled (default)
Disabled
Slot 3 Boot Driver
Enabled (default)
Disabled
Slot 4 Boot Driver
Enabled (default)
Disabled
Slot 5 Boot Driver
Enabled (default)
Disabled
Slot 6 Boot Driver
Enabled (default)
Disabled
Slot 7 Boot Driver
Enabled (default)
Disabled
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\