The easy restore feature allows you to restore your service tag,
license, UEFI configuration, and the system configuration data
after replacing the system board. All data is backed up in a backup
flash device automatically. If BIOS detects a new system board, and
the service tag in the backup flash device, BIOS prompts the user
to restore the backup information.
About this task
Below is a list of options available:
Restore the service tag, license, and diagnostics information, press Y.
Navigate to the Lifecycle Controller based restore options, press N.
Restore data from a previously created Hardware Server Profile, press F10.
NOTE:When the restore process is complete, BIOS prompts to restore the system configuration data.
To restore the system configuration data, press Y.
To use the default configuration settings, press N.
NOTE:After the restore process is complete, system reboots
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
Turn on the system.
To enter the System Setup, press F2.
Click Service Tag Settings.
Enter the service tag.
NOTE:You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct service tag. Once the service tag is entered, it cannot be updated or changed.
Click OK.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\
