Network settings
screen details
You can use the Network Settings screen to set the Boot mode from UEFI. It
also allows you to specify the boot order.
About this task
You can view
the
Network Settings screen by clicking .
The Network Settings screen details are explained
as follows:
- Menu Item
- Description
- UEFI PXE settings
- This field controls the system network settings.
- PXE Device1
- This field controls the system network settings.
Option is set to Enabled.
- PXE Device2
- This field controls the system network settings.
Option is set to Disabled
- PXE Device3
- This field controls the system network settings.
Option is set to Disabled
- PXE Device4
- This field controls the system network settings. Option
is set to Disabled
- PXE Device1 Settings
- NIC interface used for this PXE device. Option is
set to Enabled
- Interface
- NIC interface used for this PXE device. Options are:
Intergrated NIC Port 1 Partition 1
Intergrated NIC Port 2 Partition
1
Intergrated NIC Port 3 Partition 1
Intergrated NIC Port
4 Partition 1
- Protocol
- This field controls the PXE protocol used for PXE
device. Options are IPv4 (set default) and IPv6
- VLAN
- Enables or disables PXE device. Options are Enabled and Disabled (set default)
- VLAN ID
Displays the VLAN ID
- VLAN Priority
- Displays the VLAN Priority
- UEFI HTTP Settings
- This field enables the BIOS to create a UEFI boot
option for the HTTP device. Option is set to Disabled
- HTTP Device1
- This field enables the BIOS to create a UEFI boot
option for the HTTP device. Option is set to Disabled
- HTTP Device2
- This field enables the BIOS to create a UEFI boot
option for the HTTP device. Option is set to Disabled
- HTTP Device3
- This field enables the BIOS to create a UEFI boot
option for the HTTP device. Option is set to Disabled
- HTTP Device4
- This field enables the BIOS to create a UEFI boot
option for the HTTP device. Option is set to Disabled
- UEFI ISCSI Settigns
- This field specifies the name of the ISCSI initiator
(iqn format).
- ISCSI Initiator Name
- This field specifies the name of the ISCSI initiator
(iqn format).
- ISCSI Device1
- This field controls the configuration for ISCSI device.