Precision 3630 Tower Service Manual

Removing speaker

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. Cover
   2. PSU hinge
3. To remove speaker shipped with 60/ 85 W CPU system configuration:
   1. Disconnect the speaker cable from the connector on the system board [1].
   2. Press the release tab [2] and pull the speaker out from front of the system chassis [3].
      
4. To remove speaker for system shipped with 95 W CPU system configuration :
   1. Disconnect the speaker cable from the system board [1].
   2. Unroute the speaker cable from the tabs on the system board [2,3].
   3. Press the release tab and pull the speaker out from front of the system chassis [4].