Precision 3630 Tower Service Manual

Installing the optical drive

1. Align the screw hole on the optical-drive bracket with the screw hole on the optical drive [1] and replace the M2x2.5 screw to secure the optical-drive bracket to the optical drive [2].
   
2. Slide the optical drive into the drive bay from the front of the computer until it is secured.
   
3. Connect the data cable and power cable to the optical drive.
   
4. Close the PSU hinge.
5. Install the Front bezel
6. Install the cover.
7. Follow the procedure in After Working Inside Your Computer.