Precision 7770 Service Manual

Installing the primary M.2 SSD module

NOTE:For computers shipped with M.2 2280 or 2230 Solid-state drive that is installed in slot 5.

If you are replacing a component, remove the existing component before performing the installation procedure.

The figure indicates the location of the primary M.2 SSD and provides a visual representation of the installation procedure.

Installing the primary M.2 2280 SSD module

Place the SSD onto its slot on the SSD thermal plate.
Replace the (M2x2.5) screw to secure the SSD to the SSD thermal plate.
Carefully align and insert the two tabs on the SSD thermal plate into the slots on the inner frame to secure the SSD thermal plate in place.
Replace the (M2x2.5) screw to secure the SSD thermal plate to the system chassis.
Slide the SSD release latch into the lock position.