Precision 3561 Service Manual

Installing the memory module

If you are replacing a component, remove the existing component before performing the installation procedure.

NOTE Precision 3561 supports two memory slots.

The following image indicates the location of the memory module and provides a visual representation of the installation procedure.

Installing the memory module

Align the notch on the memory module with the tab on the memory-module slot.
Slide the memory module firmly at an angle, into the memory-module slot.
Press the memory module down until it clicks into place.
NOTE If you do not hear the click, remove the memory module and reinstall it.
NOTE Repeat step 1 to step 4 to install any other memory modules in your computer.