Dell PowerVault ME5 Series Storage System CLI Reference Guide

volume-view-mappings

This basetype is used by show maps.

Table 1. volume-view-mappings properties
Name	Type	Description
durable-id	string	Mapping ID.
parent-id	string	For a mapping between a volume and an initiator, the volume ID.
mapped-id	string	The ID of the mapping target, such as an initiator.
ports	string	The controller host ports to which the mapping applies. Blank if not mapped or mapped as no-access
lun	string	The LUN that identifies the volume to a host. Blank if not mapped or mapped as no-access.
access	string	Type of host access to the volume. read-write : Read and write. read-only : Read only. no-access : No access (masked). not-mapped : Not mapped.
access-numeric	uint32	Numeric equivalents of access values. 0: not-mapped 1: no-access 2: read-only 3: read-write
identifier	string	For a SAS initiator, its WWPN. For an FC initiator, its WWPN. For an iSCSI initiator, its node name (typically the IQN).
initiators-url	string	For internal use only.
nickname	string	For a host, its name in the format host-name.* , where the * represents all initiators in the host. For a host group, its name in the format host-group.. , where the first * represents all hosts in the host group and the second * represents all initiators in those hosts. Blank if not set or for all other initiators.
host-profile	string	Standard : Default profile. HP-UX: The host uses Flat Space Addressing. OpenVMS: The host does not allow LUN 0 to be assigned to a mapping.
host-profile-numeric	uint32	Numeric equivalents of host-profile values. 0: Standard 2: OpenVMS 1: HP-UX