Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerVault ME5 Series Storage System CLI Reference Guide

PDF

users

This basetype is used by show users.

Table 1. users properties
Name Type Description
username string User name.
roles string
  • monitor: User group can view but not change system settings.
  • manage: User group can view and change system settings.
  • standard: User can view and change system settings except: configuring local users; configuring LDAP; performing write operations through FTP or SFTP; performing file uploads from the PowerVault Manager; using the restore defaults command.
  • diagnostic: User group can view and change system settings.
user-type string The experience level of the user: Novice , Standard , Advanced , or Diagnostic . This parameter does not affect access to commands.
user-type-numeric string Numeric equivalents for user-type values.
  • 1: Novice
  • 2: Standard
  • 3: Advanced
  • 4: Diagnostic
user-locale string The display language.
user-locale-numeric string Numeric equivalents for user-locale values
  • 0: English
  • 3: Spanish
  • 4: French
  • 5: German
  • 7: Japanese
  • 8: Korean
  • 11: Chinese-simplified
interface-access-WBI string
  • x: User group can access the PowerVault Manager web-browser interface.
  • (blank): User group cannot access this interface.
interface-access-CLI string
  • x: User group can access the command-line interface.
  • (blank): User group cannot access this interface.
interface-access-FTP string
  • x: User group can access the FTP interface.
  • (blank): User group cannot access this interface.
interface-access-SMIS string
  • (blank): User group cannot access this interface.
interface-access-SNMP string
  • U: The user group can access the SNMPv3 interface and view the MIB.
  • (blank): User cannot access this interface.
storage-size-base uint8 The base for entry and display of storage-space sizes:
  • 2: Sizes are shown as powers of 2, using 1024 as a divisor for each magnitude.
  • 10: Sizes are shown as powers of 10, using 1000 as a divisor for each magnitude.
Operating systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2.
storage-size-precision uint8 The number of decimal places (1-10) for display of storage-space sizes.
storage-size-units string The unit for display of storage-space sizes.
  • auto: Lets the system determine the proper unit for a size.
  • MB: Megabytes.
  • GB: Gigabytes.
  • TB: Terabytes.
Based on the precision setting, if the selected unit is too large to meaningfully display a size, the system uses a smaller unit for that size. For example, if units is set to TB, precision is set to 1, and base is set to 10, the size 0.11709 TB is instead shown as 117.1 GB.
storage-size-units-numeric string Numeric equivalent for the storage-size-units value.
  • 0: Auto
  • 1: MB
  • 2: GB
  • 3: TB
temperature-scale string
  • Celsius: Temperatures are shown in degrees Celsius.
  • Fahrenheit: Temperatures are shown in degrees Fahrenheit.
timeout uint32 Time in seconds that the session can be idle before it automatically ends. Valid values are 120-43200 seconds (2-720 minutes).
authentication-type string For an SNMPv3 user, this specifies whether to use a security authentication protocol. Authentication uses the user password
  • none: No authentication.
  • MD5: MD5 authentication.
  • SHA: SHA-1 authentication.
privacy-type string For an SNMPv3 user, this specifies whether to use a security encryption protocol.
  • none : No encryption.
  • DES : Data Encryption Standard.
  • AES : Advanced Encryption Standard.
password string User password. For a standard user the password is represented by eight asterisks. For an SNMPv3 user this is the authentication password.
default-password-changed string Shows whether the default password for the user has been changed.
  • False
  • True
default-password-changed-numeric uint32 Numeric equivalents for default-password-changed values.
  • 0: False
  • 1: True
privacy-password string Encryption password for an SNMPv3 user whose privacy type is set to DES or AES .
trap-destination string For an SNMPv3 user whose interface-access-SNMP property is set to snmptarget, this specifies the IP address of the host that will receive SNMP traps.
trap-port string The SNMP trap destination port of the host for an SNMPv3 user that can receive trap notifications.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\