Dell PowerVault ME5 Series Storage System CLI Reference Guide

PDF

show users


Description	Shows configured user accounts.
Minimum role	monitor
Syntax	show users [show-snmp-password] [<user>]
Parameters	show-snmp-password Optional. Minimum role: manage. For SNMPv3 users, this parameter shows Password and Privacy Password values in clear text for reference when configuring users in the corresponding management application. If this parameter is omitted, password values are not displayed for security reasons. <user> Optional. Shows settings for the specified user only. If this parameter is omitted, settings are shown for all users.
Output	Username The user name. Roles monitor: The user can view but not change system settings. standard: User can view and change system settings except: configuring local users; configuring LDAP: performing write operations through FTP or SFTP; performing file uploads from the PowerVault Manager; using the restore defaults command. manage: The user can view and change system settings. diagnostic: The user can view and change system settings. User Type The experience level of the user: Novice, Standard, Advanced, or Diagnostic. This parameter does not affect access to commands. User Locale The display language. WBI x: The user can access the PowerVault Manager web-browser interface. (blank): The user cannot access this interface. CLI x: The user can access the command-line interface. (blank): The user cannot access this interface. FTP x: The user can access the FTP or SFTP interface. (blank): The user cannot access this interface. SNMP X: The user can access the SNMPv3 interface. (blank): The user cannot access this interface. Authentication Type MD5: MD5 authentication. SHA: SHA-1 authentication. none: No authentication. Privacy Type DES: Data Encryption Standard. AES: Advanced Encryption Standard. none: No encryption. Password The user password. For a standard user the password is represented by eight asterisks. For an SNMPv3 user this is the authentication password. Privacy Password The encryption password for an SNMPv3 user whose privacy type is set to DES or AES. Trap Host Address SNMP trap destination for an SNMPv3 user that can receive trap notifications. Trap Host Port The SNMP trap destination port of the host for an SNMPv3 user that can receive trap notifications.
Examples	Show information about all users. # show users Show information about user JSmith. # show users JSmith As a user with the manage role, show information—including SNMP passwords—for SNMPv3 user Traps. # show users Traps show-snmp-password
Base types	users status
See also	create user delete user set user