Dell PowerVault ME5 Series Storage System CLI Reference Guide

PDF

show certificates


Description	Displays a list of available server or device certificates that have been added to the storage system. The command shows information about all uploaded certificates by default, or you can use parameters to filter the output. Use the truststore parameter to see information about root and intermediate certificates in the trust store.
Minimum role	manage
Syntax	show certificates [controller a\|b\|both] [detail] [name <name>] [service web] [truststore]
Parameters	controller a\|b\|both Optional. Shows certificates only on the specified controller. The default value is both. detail Optional. Provides list-view information about each certificate, including additional information not shown in the table view. name <name> Optional. Provides information only about the certificate specified by name. The name provided must be a valid name of a certificate on the system. service web Optional. Limits display of certificates to the indicated service. truststore Optional. Displays all certificates in the trust store.
`Output`	Output without the truststore parameter Certificate Name The name of the certificate, either system-generated or user-supplied when the certificate is uploaded to the system. Certificate Type Shows the certificate type: Device-Cert Controller Displays the controller on which the certificate is installed. WEB Displays an x if the certificate is currently active for the web service. Active Services Shown by the detail parameter. Displays the service that is actively using the certificate, if any. Identity Shown by the detail parameter. The username registered with a WPA authentication server, in any. Valid From Shows the certificate start date. Valid Till Shows the certificate expiration date. Issued To The name or organization the certificate was granted to. Issued By The organization or entity that granted the certificate. State The current status of the certificate: Available Unavailable NOTE:By default, the command displays certificates on both controllers. If the partner controller is down or not communicating, certificates from the partner are shown as Unavailable. Certificate Status Shows the source of the certificate: Customer-supplied: The certificate was uploaded by the end user. System-generated: The certificate was generated by the system. Unknown status: The origin of the certificate cannot be determined. Default Services Displays any service associated with the certificate by default. NOTE:A default service applies only to system-generated certificates and can be set only during manufacturing. If a default certificate is available for a service and a customer-supplied certificate for that service has been removed or not added, the system uses the default certificate. Certificate Text Shown by the detail parameter. Displays the certificate content as text. Output with the truststore parameter Certificate Name The name of the certificate, either system-generated or user-supplied when the certificate is uploaded to the system. Certificate Type Shows the certificate type: Trust-Cert Controller Displays the controller on which the certificate is installed. Valid From Shows the certificate start date. Valid Till Shows the certificate expiration date. Issued To The name or organization the certificate was granted to. Issued By The organization or entity that granted the certificate. State The current status of the certificate: Available Unavailable NOTE:By default, the command displays certificates on both controllers. If the partner controller is down or not communicating, certificates from the partner are shown as Unavailable. Certificate Status Shows the source of the certificate: Customer-supplied: The certificate was uploaded by the end user. System-generated: The certificate was generated by the system. Unknown status: The origin of the certificate cannot be determined. Certificate Text Shown by the detail parameter. Displays the certificate content as text.
Examples	Show all device certificates. # show certificates Show certificate details for a certificate specified by name. # show certificates detail name bobCert_12345 Display all certificates in the trust store. # show certificates truststore Display trust store certificates on controller A. # show certificates truststore controller A
Basetypes	certificates status
See also	activate certificate create certificate-signing-request remove certificate show certificate