Dell PowerVault ME5 Series Storage System CLI Reference Guide

Changes the settings for an LDAP user group.

A user-group member with the standard or manage role can change any parameter except name. A member with the monitor role can change any parameter for that user except name, roles, and interfaces.

User group changes take effect when a member of the group subsequently logs in after changes have been made to the settings of an LDAP user group.

set user-group

[base 2|10]

[interfaces <interfaces>]

[precision <#>]

[roles <roles>]

[storage-size-base 2|10]

[storage-size-precision <#>]

[storage-size-units auto|MB|GB|TB]

[temperature-scale celsius|c|fahrenheit|f]

[timeout <#>]

[units auto|MB|GB|TB]

<user-group-name>

Optional. Sets the base for entry and display of storage-space sizes:

• 2: Sizes are shown as powers of 2, using 1024 as a divisor for each magnitude. In base 2 when you set a size, whether you specify a base-2 or base-10 size unit, the resulting size will be in base 2.
• 10: Sizes are shown as powers of 10, using 1000 as a divisor for each magnitude. This is the default. In base 10 when you set a size, the resulting size will be in the specified unit. This option is the default.

Operating systems usually show volume size in base 2. Disk drives usually show size in base 10. Memory (RAM and ROM) size is always shown in base 2.

Optional. Specifies the interfaces that the user can access. Multiple values must be separated by commas and no spaces

• cli: Command-line interface. This is enabled by default.
• wbi: PowerVault Manager web-browser interface. This is enabled by default.
• ftp: SFTP interface.
• none: No interfaces.

Only secure protocols are supported for the above interfaces. To enable or disable interface protocols, use the set protocols command.

Optional. Sets the number of decimal places (1–10) for display of storage-space sizes.

Optional. Specifies the user’s roles as one or more of the following values:

• monitor: User can view but not change system settings. This is the default.
• standard: User can view and change system settings except: configuring local users; configuring LDAP; performing write operations through SFTP; performing file uploads from the PowerVault Manager; using the restore defaults command.
• manage: User can view and change system settings.
• diagnostic: For use by or with direction from technical support.

Multiple values must be separated with a comma (with no spaces). If multiple values are specified, the user’s access to commands will be determined by the highest role specified.

Optional. Alias for base.

Optional. Alias for precision.

Optional. Alias for units.

Optional. Sets the scale for display of temperature values:

• fahrenheit or f: Temperatures are shown in degrees Fahrenheit.
• celsius or c: Temperatures are shown in degrees Celsius. This is the default

Optional. Sets the timeout value in seconds for the login session. Valid values are 120–43200 seconds (2–720 minutes). The default is 1800 seconds (30 minutes).

Optional. Sets the unit for display of storage-space sizes:

• auto: Sizes are shown in units determined by the system. This is the default.
• MB: Sizes are shown in megabytes.
• GB: Sizes are shown in gigabytes.
• TB: Sizes are shown in terabytes.

Based on the precision setting, if a size is too small to meaningfully display in the selected unit, the system uses a smaller unit for that size. For example, if units is set to TB, precision is set to 1, and base is set to 10, the size 0.11709 TB is instead shown as 117.1 GB.

Specifies the user account to change. A name that includes a space must be enclosed in double quotes.

# set user-group interfaces cli,wbi roles manage StorageAdmins

create user-group

delete user-group

set ldap-parameters

show audit-log

show user-groups