Dell PowerVault ME5 Series Storage System CLI Reference Guide

set snmp-parameters

[alert-notification-level all|none]

[add-trap-host <address>]

[del-trap-host <address>]

[enable crit|error|warn|resolved|info|none]

[read-community <string>]

[trap-host-list <trap-host-list>]

[write-community <string>]

Optional. Specifies the network address of a destination host that will receive traps. The value can be an IPv4 address, IPv6 address, or FQDN. Three trap hosts can be set.

Optional. Enables or disables SNMP notification of alerts.

• all: The system will send SNMP notifications for alerts. This setting is the default.
• none: The system will not send SNMP notifications for alerts.

If this parameter is omitted, the previous notification level remains.

Optional. Specifies the network address of a destination host to delete. The value can be an IPv4 address, IPv6 address, or FQDN.

Optional. Sets the level of trap notification:

• crit: Sends notifications for Critical events only.
• error: Sends notifications for Error and Critical events.
• warn: Sends notifications for Warning, Error, and Critical events.
• resolved: Sends notifications for Resolved, Warning, Error, and Critical events.
• info: Sends notifications for all events.
• none: All events are excluded from trap notification and traps are disabled. This is the default. However, Critical events and managed-logs events 400–402 are sent regardless of the notification setting.

Optional. Sets a community string for read-only access. This string must differ from the write-community string. Input rules:

• The value is case sensitive.
• The value can have a maximum of 31 bytes.
• The value can include any character except: " <>
• A value that includes a space must be enclosed in double quotes.

Optional. Replaces the current list of trap destinations.. Each value can be an IPv4 address, IPv6 address, or FQDN.

Optional. Sets a community string for write access. This string must differ from the read-community string. Input rules:

• The value is case sensitive.
• The value can have a maximum of 31 bytes.
• The value can include any characters except: " <>
• A value that includes a space must be enclosed in double quotes.

# set snmp-parameters enable crit add-trap-host 172.22.4.171 read-community public

set protocols

show snmp-parameters

test (with the snmp parameter)