Dell PowerVault ME5 Series Storage System CLI Reference Guide

set led


Description	Turns a specified device's identification LED on or off to help you locate the device. For LED descriptions, see your product’s installation or FRU documentation.
Minimum role	standard
Syntax	To set a disk LED: set led disk <ID> enable\|disable\|on\|off To set the LEDs for an enclosure and its I/O modules: set led [controller a\|b] enable\|disable\|on\|off enclosure <ID>
Parameters	[controller a\|b] Optional; for use with the enclosure parameter. Specifies the I/O module to locate. This affects the identification LED on the I/O module and on the enclosure. disk <ID> Specifies the disk to locate. For disk syntax, see Command syntax. This overrides the fault LED on the disk. enable\|disable\|on\|off Specifies to turn the LED on or off. enclosure <ID> Specifies the enclosure to locate. This affects the identification LED on the enclosure and on each I/O module.
Examples	Identify disk 5 in enclosure 1. # set led disk 1.5 on Stop identifying enclosure 1. # set led enclosure 1 off Identify controller B in enclosure 1. # set led enclosure 1 controller b on