Dell PowerVault ME5 Series Storage System CLI Reference Guide

This command removes a user-supplied certificate whether it is active or inactive. You can remove device or server certificates and trust certificates.

When the certificate being removed is the active certificate for a service:

• If there is a default system-supplied certificate available for the service, the system uses the default certificate.
• If no default system-supplied certificate is available for the service, the console prompts you to activate a certificate for the service. The service might not function as expected until a new certificate is applied.

In either case, you must restart the management controller for the changes to take effect.

remove certificate

<name>

The name of the certificate to remove. Use the show certificates command to list all certificates, where you can view certificate names. You can only remove certificates labeled as Customer-supplied.

# remove certificate CERT_A_12345

create certificate

show certificate