Dell PowerVault ME5 Series Storage System CLI Reference Guide

remote


Description	Runs a command on a remote system that is associated with the local system. If the command cannot connect to remote controller module A, it tries to connect to remote controller module B. If it is unsuccessful, the remote command is not run. Output is displayed in console or API mode depending on the local system setting. This command will not display prompts to confirm remote actions. Use caution when issuing remote commands to avoid risk of data loss or unavailability.
Minimum role	standard
Syntax	remote <remote-system> <command>
Parameters	<remote-system> The name or network-port IP address of the remote system. A name that includes a space must be enclosed in double quotes. An address can be an IPv4 address, IPv6 address, or FQDN. <command> The full name of any CLI command that is valid for the remote user role.
Examples	Run the show system command on remote system System2. # remote System2 show system
See also	show remote-systems