redundancy-mode
|
string
|
The operating mode of the system, also called the cache redundancy mode.
-
Active-Active ULP : Both controllers are active using ULP (Unified LUN Presentation). Data for volumes configured to use write-back cache is automatically mirrored between the two controllers to provide fault tolerance.
- Single Controller : The enclosure contains a single controller.
- Failed Over : Operation has failed over to one controller because its partner is not operational. The system has lost redundancy.
- Down : Both controllers are not operational.
|
redundancy-mode-numeric
|
uint32
|
Numeric equivalents for
redundancy-modevalues.
-
8: Active-Active ULP
- 9: Single Controller
- 10: Failed Over
- 11: Down
|
redundancy-status
|
string
|
- Oeprational but not redundant : Both controllers are operational but are not mirroring their cache metadata to each other.
- Redundant : Both controllers are operational.
- Operational but not redundant : In active-active mode, one controller is operational and the other is offline. In single-controller mode, the controller is operational.
- Down : Thi s controller is not operational.
- Unknown: Status information is not available.
|
redundancy-status-numeric
|
uint32
|
Numeric equivalents for
redundancy-status values.
-
0: Operational but not redundant
- 2: Redundant
-
4: Down
- 5: Unknown
|
controller-a-status
|
string
|
- Operational : The controller is operational.
- Down : The controller is installed but not operational.
- Not Installed : The controller is not installed.
|
controller-a-status-numeric
|
uint32
|
Numeric equivalents for
controller-a-status values.
-
0: Operational
-
1: Down
-
2: Not Installed
|
controller-a-serial-number
|
string
|
- Controller module serial number
-
Not Available
: The controller is down or not installed.
|
controller-b-status
|
string
|
-
Operational : The controller is operational.
- Down : The controller is installed but not operational.
- Not Installed : The controller is not installed.
|
controller-b-status-numeric
|
uint32
|
Numeric equivalents for
controller-b-status values.
- 0: Operational
- 1: Down
- 2: Not Installed
|
controller-b-serial-number
|
string
|
- Controller module serial number
- Not Available : The controller is down or not installed.
|
other-MC-status
|
string
|
The operational status of the Management Controller in the partner controller. This is not factored into system health.
- Operational: The partner Management Controller is responding normally.
-
Not Operational: The local Management Controller has established communication with the partner Management Controller, but the partner is not responding because it is not currently in active-active or failed-over state.
- Not Communicating: The partner Management Controller is not ready to communicate.
-
Unknown: The operational status of the partner Management Controller cannot be determined.
|
other-MC-status-numeric
|
uint32
|
Numeric equivalents for
other-mc-status values.
- 4749: Operational
- 3231: Not Operational
-
1524: Not Communicating
-
1496: Unknown
|
system-ready
|
string
|
Shows whether the system is ready for running a script.
- Ready: The system is ready.
- Not Ready: The system is not ready.
|
system-ready-numeric
|
uint32
|
Numeric equivalent for the
system-ready value.
|
local-ready
|
string
|
Shows the local controller's contribution towards
system-ready.
- Ready: The local controller's contribution is ready.
- Storage Controller is Not Ready: The Storage Controller's contribution is not ready.
- Management Controller is Not Ready: The Management Controller's contribution is not ready.
- Activity is currently in progress: A partner firmware update, firmware installation, or log retrieval is in progress. Wait for that operation to complete and try again.
|
local-ready-numeric
|
uint32
|
Numeric equivalent for the
local-ready value.
- 0: Ready
- 1: Storage Controller is Not Ready
- 2: Management Controller is Not Ready
- 3: Activity is currently in progress
|
local-reason
|
string
|
The explanation for the
local-ready value.
|
other-ready
|
string
|
Shows the partner controller's contribution towards
system-ready.
- Ready: The partner controller's contribution is ready.
- Storage Controller is Not Ready: The Storage Controller's contribution is not ready.
- Management Controller is Not Ready: The Management Controller's contribution is not ready.
- Activity is currently in progress: A partner firmware update, firmware installation, or log retrieval is in progress. Wait for that operation to complete and try again.
|
other-ready-numeric
|
uint32
|
Numeric equivalent for the
other-ready value.
- 0: Ready
- 1: Storage Controller is Not Ready
- 2: Management Controller is Not Ready
- 3: Activity is currently in progress
|
other-reason
|
string
|
The explanation for the
other-ready value.
|