Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerVault ME5 Series Storage System CLI Reference Guide

PDF

network-parameters

This basetype is used by show network-parameters.

Table 1. network-parameters properties
Name Type Description
durable-id string Controller network port ID in the format mgmtport_controller-ID
active-version uint32 The configured network port IP version.
  • 4: IPv4
  • 6: IPv6
ip-address string Controller network port IP address.
gateway string Controller network port gateway IP address
subnet-mask string Controller network port IP subnet mask
mac-address string Controller network port MAC address.
addressing-mode string
  • Manual: Network settings are set manually (statically).
  • DHCP: DHCP is used to set network parameters.
addressing-mode-numeric uint32 Numeric equivalents for addressing-mode values.
  • 1: Manual
  • 2: DHCP
link-speed string
  • Unknown: For a system operating in Single Controller mode, this controller module is not present.
  • 10mbps: The network port link speed is set to 10 Mb/s.
  • 100mbps: The network port link speed is set to 100 Mb/s.
  • 1000mbps: The network port link speed is set to 1000 Mb/s.
link-speed-numeric uint32 Numeric equivalents for link-speed values.
  • 0: 10mbps
  • 1: 100mbps
  • 2: 1000mbps
duplex-mode string
  • Undefined: For a system operating in Single Controller mode, this controller module is not present.
  • Half: The network port duplex mode is set to half duplex.
  • Full: The network port duplex mode is set to full duplex.
duplex-mode-numeric uint32 Numeric equivalents for duplex-mode values.
  • 0: full
  • 1: half
  • 2: Undefined
auto-negotiation string Not supported.
auto-negotiation-numeric uint32 Not supported.
health string The health of the network connection.
  • OK
  • Degraded
  • Fault
  • N/A
  • Unknown
health-numeric uint32 Numeric equivalents for health values.
  • 0: OK
  • 1: Degraded
  • 2: Fault
  • 3: Unknown
  • 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended actions to take to resolve the health issue.
ping-broadcast string
  • Enabled: The system will respond to a broadcast ping.
  • Disabled: The system will not respond to a broadcast ping.
ping-broadcast-numeric uint32 Numeric equivalents for ping-broadcast values.
  • 0: Disabled
  • 1: Enabled

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\