Dell PowerVault ME5 Series Storage System CLI Reference Guide

iscsi-parameters

This basetype is shown by show iscsi-parameters.

Table 1. iscsi-parameters properties
Name	Type	Description
chap	string	Shows whether Challenge-Handshake Authentication Protocol (CHAP) is enabled. Enabled: CHAP is enabled. Disabled: CHAP is disabled.
chap-numeric	uint32	Numeric equivalents for chap values. 0: Disabled 1: Enabled
jumbo-frames	string	Shows whether support for jumbo frames is enabled. Enabled: Jumbo-frame support is enabled. Disabled: Jumbo-frame support is disabled.
jumbo-frames-numeric	uint32	Numeric equivalents for jumbo-frames values. 0: Disabled 1: Enabled
isns	string	Shows whether support for Internet Storage Name Service (iSNS) is enabled. Enabled: iSNS is enabled. Disabled: iSNS is disabled.
isns-numeric	uint32	Numeric equivalents for isns values. 0: Disabled 1: Enabled
isns-ip	string	Address of the iSNS server. The default address is all zeroes.
isns-alt-ip	string	Address of the alternate iSNS server. The default address is all zeroes.
iscsi-speed	string	iSCSI host port link speed. auto: The proper speed is auto-negotiated. 1Gbps: The speed is forced to 1 Gbit/s, overriding a downshift that can occur during auto-negotiation with 1-Gbit/s HBAs. This setting does not apply to 10-Gbit/s HBAs.
iscsi-speed-numeric	uint32	Numeric equivalents for iscsi-speed values. 0: auto 1: 1Gbps
iscsi-ip-version	uint8	iSCSI IP version. 4: iSCSI host port addresses use IPv4 format. 6: iSCSI host port addresses use IPv6 format.