Dell PowerVault ME5 Series Storage System CLI Reference Guide

initiator

This basetype is used by show initiators.

Table 1. initiator properties
Name	Type	Description
durable-id	string	Initiator ID.
nickname	string	The nickname of the initiator, or blank.
discovered	string	Yes: The initiator was discovered and its entry was automatically created. No: The initiator was manually created.
mapped	string	Yes: At least one volume is explicitly mapped to the initiator. No: No volumes are explicitly mapped to the initiator.
profile	string	Standard : Default profile. HP-UX: The host uses Flat Space Addressing. OpenVMS: The initiator does not allow LUN 0 to be assigned to a mapping.
profile-numeric	uint32	Numeric equivalents of profile values. 0: Standard 1 : HP-UX 2: OpenVMS
host-bus-type	string	If the host was discovered and its entry was automatically created, its host interface type: FC, iSCSI, SAS. If the host entry was manually created: Undefined.
host-bus-type- numeric	uint32	Numeric equivalents of host-bus-type values. 0: UNKNOWN 6: FC 8: SAS 9: iSCSI
id	string	For an FC initiator, its WWPN. For a SAS initiator, its WWPN. For an iSCSI initiator, its node name (typically the IQN).
url	string	For internal use only.
host-id	string	If the initiator is a member of a host, the serial number of the host. Otherwise, NOHOST.
host-key	string	If the initiator is a member of a host, the durable ID of the host. Otherwise, HU.
host-port-bits-a	uint32	For internal use only.
host-port-bits-b	uint32	For internal use only.