Dell PowerVault ME5 Series Storage System CLI Reference Guide

Creates a persistent association with a remote storage system.

This allows a local system to track remote systems by their network-port IP addresses and cache their login credentials. The IP address you specify is used to connect to the remote system and obtain information such as the system name and both controllers' IP addresses. You can then use the system name or an IP address in commands that need to interact with the remote system.

create remote-system

password <password>

username <username>

<IP-address>

password <password>

The password of the user specified by the username parameter.

username <username>

The name of a user in the remote system. This must be a user having the standard or manage role to remotely configure or provision that system.

<IP-address>

The network-port IP address of the remote system. The value can be an IPv4 address, IPv6 address, or FQDN.

Create a remote system with username JDoe, password Abcd_1234, and IP address 10.122.1.21.

# create remote-system username JDoe password Abcd_1234 10.122.1.21

remote

set remote-system

show remote-systems