Dell PowerVault ME5 Series Storage System Deployment Guide

Configure SLES 12 iSCSI initiators to connect to the storage system

1. From the server terminal or console, use the yast command to access YaST Control Center.
2. Select Network Service > iSCSI Initiator.
3. On the Service tab, select When Booting.
4. Select the Connected Targets tab.
5. Select Add. The iSCSI Initiator Discovery screen displays.
6. Using the example worksheet you created earlier, enter the IP address for port A0 in the IP Address field, then click Next. For example: 192.68.10.200.
7. Select Connect.
8. On iSCSI Initiator Discovery screen, select the next adapter and then select Connect.
9. When prompted, select Continue to bypass the warning message, “Warning target with TargetName is already connected”.
10. Select Startup to Automatic, then click Next.
11. Repeat steps 2-10 for all remaining adapters.
12. Once the targets are connected, click Next > Quit to exit YaST.
13. Reboot the host to ensure that all targets are automatically connected.