Dell PowerVault ME5 Series Storage System Deployment Guide

Assign IP addresses for SLES 12

1. From the server terminal or console, run the yast command to access the YaST Control Center.
2. Select System > Network Settings.
3. Select the iSCSI NIC that you want to assign an IP address to, then select Edit.
4. Select Statically Assigned IP Address.
5. Using the planning worksheet that you created previously, enter the NIC IP address and subnet mask.
6. Select Next.
7. Ping the new network interface and associated storage host ports to ensure IP connectivity.
8. Repeat steps 1 through 7 for each NIC IP address.
9. Select OK to exit network settings.
10. Select OK to exit YaST.