Show drive information
Description
This command provides detailed information about the specified HDD.
Command syntax
shmcli (info drive | infodrive | id) (-a=<(SAS WWID | AdapterIndex)> [-enc=<(WWN | EnclIndex)> [-w=<DrawerIndex>]] -d=<(WWN | EnclosureSlotIndex | DrawerSlotIndex | Serial Number | Drive OS Path)> [-outputformat=<SupportedOutputFormats>] [-smart] | -d=<(WWN | Serial Number | Drive OS Path [-outputformat=<SupportedOutputFormats>>)] [-smart] | [-h])
Parameters
Table 1. Drive informationThis table shows the parameters used to display information about drives.
Parameter
|
Description
|
-a
|
Specifies the adapter used for the command. This is either SAS WWID or AdapterIndex.
|
-enc
|
Specifies the enclosure used for the command. This is either WWN or EnclIndex.
|
-w
|
Specifies the drawer index used for the command.
|
-d
|
Specifies the hard disk drive used for the command. This can be any of the following:
- WWN — Can be used anytime.
- Serial Number — Can be used anytime.
- Drive OS path — Can be used anytime.
- Drawer Slot Index (Index of the drive in the specific drawer) — Use if the 'drawer' argument is used for the command.
- Enclosure Slot Index — Use if drawer argument is not being used for the command
|
-outputformat
|
You can specify the following output formats: XML or JSON.
|
-h
|
Provides more information about the command, description, and usage.
|
-smart
|
Display the S.M.A.R.T attribute data for the specific physical drive.
|
-
info drive -a=500abcdefgh12345 -enc=1 -w=0 -d=4
-
info drive -a=1 -enc=1 -d=//./PHYSICALDRIVE50 -smart -outputformat=xml
-
info drive -d=500a123456789012