Show adapter
information
Description
This command provides information about the specified adapter and
status or count of the attached devices.
Command syntax
shmcli (info adapter | infoadapter | ia) (-a=<(SAS WWID | AdapterIndex)> [-outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 1. Adapter informationThis table shows the parameters used to display
information about adapters.
Parameter |
Decription |
-a |
Specifies the adapter used for the command. This
is either SAS WWID or AdapterIndex. |
-h |
Provides information about the command, description,
and usage. |
-outputformat |
You can specify the following output formats:
XML or JSON. |