Dell Storage PowerTools Server Hardware Manager Version 3.2 Administrator’s Guide

PDF

List voltage sensors

Description

This command lists the voltage sensors accessible from the specified enclosure.

Command syntax

shmcli (list voltage sensors | listvoltagesensors | lvs) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 1. List voltage sensorsThis table shows the parameters used to list the voltage sensors.
Parameter	Description
-a	Specify the adapter used for the command. This can be either SAS WWID or AdapterIndex.
-enc	Specify the enclosure used for the command. This is either WWN or EnclIndex.
-h	Provides more information about the command, description, and usage.
-outputformat	You can specify the following output formats: XML or JSON.

list voltage sensors -a=1 -enc=500a123456789012

```
list voltage sensors -a=1 -enc=0
```

list voltage sensors -enc=500a123456789012 -outputformat=xml