Dell Storage PowerTools Server Hardware Manager Version 3.2 Administrator’s Guide

PDF

List drawers

Description

This command lists the drawers accessible from the specified enclosure. Depending on your enclosure, you may have one drawer or multiple drawers.

Command syntax

shmcli (list drawers | listdrawers | ldraw) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 1. List drawersThis table shows the parameters used to list the drawers.
Parameter	Description
-a	Specifies the adapter used for the command. This is either SAS WWID or AdapterIndex.
-enc	Specifies the enclosure used for the command. This is either WWN or EnclIndex.
-h	Provides more information about the command, description, and usage.
-outputformat	You can specify the following output formats: XML or JSON.

```
list drawers -a=1 -enc=500a123456789012
```
```
list drawers -a=1 -enc=0
```

list drawers -enc=500a123456789012 -outputformat=xml