Value | - | Description |
---|---|---|
Description | Enables or disables SMART functionality in the specified drive. | |
Syntax |
shmcli (drive smart | drivesmart | ds) -a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> -s=<EnclosureSlotIndex> [-on | -off] | [-h]) |
|
Parameters | -a | Specifies the adapter used for the command. This can be either SAS WWID or AdapterIndex. |
-enc | Specifies the enclosure used for the command. This can be either WWN or EnclIndex. | |
-s | Specifies the Enclosure Slot Index used for the command. This is retrieved by the list drives or info drive command. | |
-on | Enables the SMART functionality in the specified drive. | |
-off | Disables the SMART functionality in the specified drive. | |
-h | Provides more information about the command, description, and usage. |