Value | - | Description |
---|---|---|
Description | Turns off or turns on the drive in the specified enclosure slot number. | |
Syntax |
shmcli (drive power | drivepower | dp) (-a=<(SAS WWID | AdapterIndex)> -enc=<(WWN | EnclIndex)> -s=<EnclosureSlotIndex> [-on | -off] | [-h])
|
|
Parameters | -a | Specifies the adapter used for the command. This can be either SAS WWID or AdapterIndex. |
-enc | Specifies the enclosure used for the command. This can be either WWN or EnclIndex. | |
-s | Specifies the Enclosure Slot Index used for the command. This is retrieved by the list drives or info drive command. | |
-on | Turns on the drive on the specified enclosure slot. | |
-off | Turns off the drive on the specified enclosure slot. | |
-h | Provides more information about the command, description, and usage. |