Dell Storage PowerTools Server Hardware Manager Version 3.2 Administrator’s Guide

PDF

List failed drives

Description

Lists the drives that have been predicted to fail and/or drives which have returned errors through system calls. The output describes the call attempted and the SCSI error codes returned.

Command syntax

shmcli  (list failed drives | lfd) ([-a=<(SAS WWID | AdapterIndex)>] [-enc=<(WWN | EnclIndex)> [-w= <DrawerIndex>]] [-outputformat=<SupportOutputFormats>] [-verbose] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] [-verbose] | [-h])

Parameters

Table 1. List failed drivesThis table shows the parameters used to list the failed drives.
Parameter	Description
-a	Specifies the adapter used for the command. This is either SAS WWID or AdapterIndex.
-enc	Specifies the enclosure used for the command. This is either WWN or EnclIndex.
-w	Specifies the drawer index used for the command.
-h	Provides more information about the command, description, and usage.
-outputformat	You can specify the following output formats: XML or JSON.

Command examples

```
list failed drives
```
```
list failed drives –a=0
```

list failed drives –enc=500a123456789012