List current sensors
Description
Lists the current sensors accessible from the specified enclosure.
Command syntax
shmcli (list current sensors | listcurrentsensors | lcs) (-a=<(SAS WWID| AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat=<SupportedOutputFormats>] | -enc=<WWN> [-outputformat=<SupportedOutputFormats>] | [-h])
Parameters
Table 1. List current sensorsThis table shows the parameter used to list the current sensors.
Parameter
|
Description
|
-h, -help
|
Provides more information about the command, description, and usage.
|
-outputformat
|
You can specify the following output formats: XML or JSON.
|
-a, -adapter
|
Specify the adapter used for the command. This is either SAS WWID or the AdapterIndex.
|
-enc
|
Specify the enclosure is used for the command. This is either WWN or the EnclosureIndex.
|
-
list current sensors -a=1 -enc=500a123456789012
-
list current sensors -a=1 -enc=0
-
list current sensors -enc=500a123456789012 -outputformat=xml