Dell EMC PowerVault MD34XX/38XX Series Support Matrix

Standard Gigabit and 10 Gigabit Ethernet adapters are supported when used with supported software iSCSI initiators. Hosts must have a standards compliant iSCSI initiator to access Dell PowerVault MD Series storage. Initiator support is provided by the initiator or operating system vendor. Dell PowerVault does not support Converged Network Adapters (CNA) in Converged mode. Although Dell PowerVault does not endorse or support initiators directly, this support matrix provides some useful configuration information for common initiators

Dell PowerVault MD Series Arrays work with any RFC 3720 iSCSI compliant initiators. The initiator must support all mandatory iSCSI features (IPSec is not required). This information is subject to change without notice. Dell is not responsible for any errors in this information

NOTE: Hardware initiators are not supported by Dell.

Read the initiator documentation and Release Notes from the particular vendors, and the Dell PowerVault MD-Series Release Notes for up-to-date configuration recommendations.