Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerStore Installation and Service Guide for PowerStore 1000, 1200, 3000, 3200, 5000, 5200, 7000, 9000, and 9200

PDF

Install the internal M.2 boot module

Steps

  1. Place the internal M.2 boot module into the M.2 boot module adaptor.
    NOTE:The side of the internal M.2 boot module with the barcodes should be facing up.
  2. Align the blue tab on the replacement internal M.2 boot module with the slot on the M.2 boot module adaptor and gently push it into place.
  3. Connect the pull tab to the blue adapter.
    Figure 1. Installing the internal M.2 boot module into the M.2 boot module adaptor
    Installing the internal M.2 boot module into the M.2 boot module adaptor.
  4. Touching only the outside edges of the M.2 boot module adaptor, align the M.2 boot module adaptor with the connector.
  5. Firmly push the M.2 boot module adaptor straight down into the connector.
    When the M.2 boot module adaptor is fully seated, you will hear a snap, and feel the connector latches click into place.
    Figure 2. Installing the M.2 boot module adaptor
    Installing the M.2 boot module adaptor.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\