- Notes, cautions, and warnings
- Additional Resources
- Introduction
- Power control procedures
- Safety precautions for handling replaceable units
- Support Notifications
The following table provides a preview of the steps that are required to power off, power on, or reboot the relevant component in your cluster:
Component | Action | Procedure |
---|---|---|
Node | Power off | Use PowerStore Manager or run a service script. |
Power on |
|
|
Reboot | Use PowerStore Manager or run a service script. | |
Appliance | Power off | Use PowerStore Manager or run a service script. |
Power on | If the nodes or expansion enclosures were removed from the chassis, reseat the expansion enclosures and nodes. Reconnect power cables in the right order. | |
Cluster | Power off | Use PowerStore Manager or run a service script. |
Power on | If the nodes or expansion enclosures were removed from the chassis, reseat the expansion enclosures and nodes. Reconnect power cables in the right order. |