- Notes, cautions, and warnings
- Additional Resources
- Overview
- Storage services overview
- Prepare to configure the switches and networks for Storage services
- Switch requirements for deployments with storage services
- Network requirements for deployments with storage services
- Configuring PowerStore storage networks with Dell PowerSwitch Series S4148 Top-of-Rack switches
- Sample configuration
- Install the Top-of-Rack switches into the cabinet with the PowerStore appliance
- Configure Dell PowerSwitch Series for Storage services
- Get the completed Switch resources for Storage services worksheet
- Establish a terminal session to the switch
- Validate the switch version and licensing
- Configure general settings on the Top-of-Rack (ToR) switches
- Configure Virtual Link Trunking interconnect
- Configure the uplink ports on the Top-of-Rack (ToR) switches
- Configure the iSCSI network on the ToR switches
- Configure NVMe/TCP network on the ToR switches
- Configure the Replication and Block Import network on the ToR switches
- Configure NAS networks on the ToR switches
- Configure Cluster network on the Top-of-Rack switches
- Cable Dell PowerSwitch Series ToR switches for Storage services
- Validate PowerSwitch Series configuration with ToR switches
- Configure Storage networks in PowerStore Manager
- Create an additional Storage network
- Expand a Storage network to run across multiple ports
- Configuring a Fail-Safe Network with Dell PowerSwitch Series S4148 Top-of-Rack switches
- Sample Configuration
- Configure the Dell PowerSwitch Series to extend the NAS network with a Fail-Safe Network
- Get the completed worksheet for Switch resources to extend the NAS network with a Fail-Safe Network
- Cable the switches for the Fail-Safe Network
- Establish a terminal session to the switch
- Configure the Fail-Safe Network on the switch
- Validate NAS with FSN configuration on the Top-of-Rack (ToR) switches
- Create the Fail-Safe Network in PowerStore Manager
- File Mobility
- Configuring PowerStore T model appliances with ToR switches without a VLT interconnect
- Other Dell PowerSwitch Series configuration operations
Dell PowerStore PowerStore T and Q Networking Guide for Storage Services
Cable the Top-of-Rack switches to the core uplinks
Cable the Dell PowerSwitch Series S4148-ON Top-of-Rack (ToR) switches to the core uplinks.
| 1. | Connect port 30 of the bottom ToR switch to the core Uplink A. |
| 2. | Connect port 29 of the bottom ToR switch to the core Uplink B. |
| 3. | Connect port 29 of the top ToR switch to the core Uplink A. |
| 4. | Connect port 30 of the top ToR switch to the core Uplink B. |
NOTE:Work with your network administrator to determine the uplink ports to which the ToR switches connect.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\