Dell PowerStore Configuring Multiprotocol File Sharing

Configuring a UDS using LDAP for an existing NAS server

1. In the PowerStore Manager, select Storage > NAS Servers.
2. Select the NAS server and then select the Naming Services tab.
3. Select the UDS tab.
4. In the Unix Directory Service field, select LDAP.
5. Enter the port number.
   NOTE:By default, LDAP uses port 389, and LDAP over SSL (LDAPS) uses port 636.
6. Enter IP addresses (a single address, multiple addresses that are separated by commas, or a range of addresses) and select Add.
7. Configure the LDAP authentication as described in LDAP Authentication.
8. Enter the Base DN in X.509 format.
9. For an iPlanet LDAP server, enter the Profile DN (optional).
10. To upload an LDAP schema, select Upload New Schema and then Select File.
11. If you want to use secure LDAP, select the option.
12. Select Confirm.