Dell PowerStore Service Scripts Guide

PDF

See command details (svc_mgmt_operations command_detail)

This service script enables you to query commands using filters and see details for each command.

Usage

Function	Diagnostic
Mode	Normal or Service
Usage	General use
Requires service user password?	No
Requires root privileges?	No
May cause data unavailability?	No
May cause data loss?	No
Scope	Cluster
Prerequisites	None

Format

svc_mgmt_operations command_detail [-h] [--command_id <value>] 
[--command_type [command_type value]] [--command_state [{INITIAL,QUEUED,RUNNING,
COMPLETED}]] [--start_after <value>] [--end_after 
<value>] [--processing_longer_than <value>] 
[--processing_shorter_than <value>] [--top_level_commands] 
[--response_status [{OK,VALIDATION_ERROR,NOT_FOUND_ERROR,ERROR,INTERNAL_ERROR,
UNKNOWN,RUNNING,CANCELLED,UNRECOVERABLE_ERROR,BUSY} [{OK,VALIDATION_ERROR,
NOT_FOUND_ERROR,ERROR,INTERNAL_ERROR,UNKNOWN,RUNNING,CANCELLED,UNRECOVERABLE_ERROR,
BUSY} ...]]] [--response_state {CREATED,ACKNOWLEDGED}]

Optional arguments

Qualifier	Description
-h, --help	Show the help message and exit.
--command_id	Show the command by ID.
--command_type	Show commands that match the specified command type.
--command_state	Show commands that match the specified command state.
--start_before	Show commands that started before the specified time.
--end_before	Show commands that ended before the specified time.
--start_after	Show commands that started after the specified time.
--end_after	Show commands that ended after the specified time.
--processing_longer_than	Show commands with a processing time longer than the specified interval.
--processing_shorter_than	Show commands with a processing time shorter than the specified interval.
--top_level_commands	Filter nontop-level commands.
--response_status	Show commands that match the specified response status.
--response_state	Show commands that match the specified response state.

Example

The following example shows detailed output for the command svc_mgmt_operations command_detail when searching for error responses within a one-day period:

svc_mgmt_operations command_detail --response_status ERROR --end_before "1 day ago"
Query command details using filter (end_time < (current_timestamp - interval '1 day')) AND (response_status = 'ERROR')
====================================================================================================
Command : com.emc.cyclone.contexts.elicense.domain.commands.LicenseRetrieveCommand
id : 9a1cee95-6854-4e1b-84c1-d87d8ece660c
command type : com.emc.cyclone.contexts.elicense.domain.commands.LicenseRetrieveCommand
internal : False
command json : {"executionLocation":"CLUSTER_MASTER","userRole":"","is_restartable":true,"submit_time":"2021-10-13T08:06:45.473142Z","is_encrypted":false,"canQueue":true,"retention_period":0}
work unit status : FAILED
perc. complete : 100
processing time: 0:00:39.854691
start time : 2021-10-13 08:06:45.762335+00:00
end time : 2021-10-13 08:07:25.617026+00:00
completion time : None
percent. completed time : 100
status response : ERROR
response class name : com.emc.bedrock.command.SimpleCommandResponse
messages : [{"code": "0xE0D010020005", "@class": "com.emc.bedrock.core.LocalizableMessage", "severity": "ERROR", "arguments": ["Failed to get the token"], "description": null, "localizedMessage": null, "resourceBundleName": "com.emc.cyclone.messages.elicense.Elicense", "encodedLocalizedJson": null}]
json response : {}