Dell PowerStore Service Scripts Guide

PDF

Install the PowerStore system (svc_manufacturing)

This service script eases the installation process and includes options to assist with automation and triage processes.

CAUTION:Only trained service personnel should use this script.

Usage

Function	Configuration
Mode	Service
Usage	Service
Requires service user password?	Yes
Requires root privileges?	Yes
May cause data unavailability?	Yes
May cause data loss?	Yes
Scope	Node or appliance
Prerequisites	None

Format

svc_manufacturing [-h] [--firmware_report_full] [--check_mfg_mode_flag]
                         [--health_check] [--disable_kernel_messages]
                         [--eve_args] [--show_reinit_states]
                         [--firmware_report] [--stack_up] [--show_ssd]
                         [--show_network] [--show_dare]
                         [--network_ip_and_gateway value]
                         [--run_all_triage] [--show_psus] [--verify_stack_up]
                         [--hardware_report] [--eve_download]
                         [--disable_network] [--verify_stack_down]
                         [--stack_down] [--enable_network]

Optional arguments

Qualifier	Description
-h, --help	Show the help message and exit.
--health_check	Perform a health check.
--eve_args	Show the arguments for the eve_download command.
--firmware_report	Show firmware information.
--stack_up	Bring the stack up.
--show_network	Display network interfaces with IP addresses.
--network_ip_and_gateway	Specify the network IP or netmask gateway.
--show_psus	Show power supply information.
--eve_download	Download the EVE.
--hardware_report	Display resume information.
--enable_network	Enable the network.
--stack_down	Bring the stack down.
--firmware_report_full	Show detailed firmware information.
--check_mfg_mode_flag	Verify that the manufacturing process is not still in progress.
--disable_kernel_messages	Turn off kernel debug messaging.
--show_reinit_states	Display the contents of the cyc_state directory.
--show_ssd	Display SSD information.
--show_dare	Display D@RE information.
--run_all_triage	Run the full suite of triage commands.
--verify_stack_up	Verify that the operating system stack is up.
--disable_network	Disable the network.
--verify_stack_down	Verify that the operating system is in the factory state.

Example

The following example shows how to enable the network, specifying the network IP address and gateway:

svc_manufacturing --enable_network --network_ip_and_gateway 'network IP address/gateway server'