Disable alert notifications before a drive firmware upgrade
Disable notifications during drive firmware upgrades to prevent call home alerts from being sent to Support.
Steps
-
On the
Settings page, select
Disable Support Notifications in the
Support section.
-
Select the appliance for which you want to suspend notifications and click
Modify.
-
In the
Modify Maintenance Mode slide-out panel, select the
Enable Maintenance Mode option.
-
Specify 2 hours in the
Maintenance Window Duration field to suspend notifications during the drive firmware upgrade.
Support notifications are automatically reenabled after the specified window.
-
Click
Apply.
Optionally view the
End Time (Cluster Time) for maintenance mode in the table.
-
Repeat this process for any other appliances in the cluster.
Data is not available for the Topic