Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerStore Installation and Service Guide for PowerStore 1000, 1200, 3000, 3200, 5000, 5200, 7000, 9000, and 9200

Install an I/O module

Steps

  1. Align the module with the empty slot and carefully push the module into the slot.
    Figure 1. Installing an I/O module
    Installing an IO module.
  2. When the I/O module appears seated, push and release the small button on the handle.
    • If the button remains in, the module is fully seated.
    • If the button springs back, gently push the module further into the chassis, then push it again.
    • If the button still does not rest flush with its handle, remove the module and repeat steps 1 and 2.
    Figure 2. Locking the I/O module into place
    Locking the IO module into place.
  3. Connect the cables into the assigned I/O module ports.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\