Partial network automation: Deploying a
PowerFlex storage-only node
This procedure describes how to deploy a
PowerFlex storage-only node with embedded operating system using partial network automation option with
PowerFlex Manager.
About this task
The partial network automation option will not configure any changes to physical switches. The changes on the switch ports are required to be configured by the customer before executing this service. See switch example configurations in
Customer Switch Port Configuration Examples.
The procedure steps through how to deploy a service by creating a new template. A sample template can be used to create a template but does not show the steps here.
Prerequisites
To create a new template from a clone, do the following:
Log in to
PowerFlex Manager, and click
Templates > Add a Template to open
Add a Template wizard.
Select
Clone an existing
PowerFlex Manager template.
Click
? to access the online help.
Follow the instructions on how to add a new template from a sample template.
To download the minimal embedded operating system image file, see the Intelligent Catalog for the exact ISO to be used.
Click a link to one of the mirror images available in your region.
NOTE:The links lead to the same Index page.
Download the minimal ISO that is specified in the Intelligent Catalog.
For example,
CentOS-7-x86_64-Minimal-2009.iso.
Steps
Log in to
PowerFlex Manager.
Add the OS image to the repository.
NOTE:Skip this step if the OS image is already added to the repository.
Click
Settings from menu bar and click
Compliance and OS Repositories.
Click the
OS Image Repositories tab.
Click
Add to open
Add OS Image Repository wizard and enter the following:
OS image information
Details
Repository name
Enter
<Enter embedded OS image name>
Image type
Select
Red Hat / CentOS 7
Source path and filename
Enter
http://<server IP>/<folder>/<image name>.iso
Username
Enter
<username>
Password
Enter
<password>
Validate the path is working correctly, click
Test Connection.
Click
Add to upload the ISO image.
Click
Templates.
Click
Add a Template to open the
Add a Template page.
Enter the
Template Name.
Click
Next.
Under
Create Template, enter the following details:
Clone template
Details
Template name
Enter
<Template name>.
Example name:
embedded os storage Template.
Template Category
Select
Create New Category.
Enter a name in the
New Category Name box.
Template Description
Enter
<Template Description>
Example:
storage-only nodes with embedded os
Firmware and software compliance
Select the
latest Intelligent Catalog version from the list.
Who should have access to the service deployed from this template?
Select from the list who should have access to this service template.
Click
Save.
Click
Add Node to open the Node wizard and select
Partial Network Automation.
Click
Continue.
Enter the following details:
Node
Details
Component name
Enter
<embedded os image>.
Number of instances
Enter
<Number>
Related components
Select
Associate Selected.
Check the checkbox for PowerFlex cluster.
Click
Continue.
Under
OS Settings, enter the following settings:
Description
Values
Host name selection
Select
<appropriate host name selection>
OS image
Select
< Embedded OS Image>
OS credentials
Select
<OS Credential Name>
Time zone
Select
<Time zone>
NTP server
Select
<NTP Server>
Use Node for Dell PowerFlex
Select the checkbox
PowerFlex role
Select
Storage Only
Enable compression
Select the checkbox
Enable encryption
Select the checkbox
Enable replication
Select the checkbox
Switch port configuration
Select
Port Channel (LACP enabled)
Teaming and bonding configuration
Select
Mode4 (IEEE 802.3ad policy)
Under
SVM OS Settings, enter the details within the following table:
SVM OS settings
Details
Host name selection
Select <
appropriate host name selection >
Host name template
Enter <
host name template >
OS credentials
Select <
OS Credentials >.
NTP server
Enter <
IP Address >.
Under
Hardware Settings, enter the details within the following table:
Hardware settings
Details
Target boot device
Select
Local Flash Storage for Dell PowerFlex
Node pool
Select <
pool name >
Under
BIOS Settings, enter the details within the following table:
BIOS settings
Details
System profile
Select
Performance
User accessible USB ports
Select
All Ports On
Number of cores per processor
Select
All
Virtualization technology
Select
Enabled
Logical processor
Select
Enabled
Execute disable
Select
Enabled
Node interleaving
Select
Enabled
Under
Network Settings, follow the steps below to add interfaces.
If deploying a multi-VLAN or multi-subnet configuration:
For a multi-subnet or multi-VLAN configuration, select
Multi-Network Selection checkbox to configure more than one network per one or more of the network types (including replication).
For a multi-replication configuration, update the
Number of Replication Networks Per Node field box if the replication checkbox is selected. The default is two networks per
PowerFlex node. More than two
PowerFlex nodes can be created in multiples of two.
NOTE:If the
Number of Replication Networks Per Node is not visible, the
Enable replication checkbox is not selected under
OS Settings, manually add all the networks (including same-VLAN or multi-VLAN networks) that belong to the appropriate interface.
Click
Add New Interface to create the first interface.
NOTE:For a multi-subnet or multi-VLAN configuration, manually add all the networks (including same-VLAN or multi-VLAN networks) that belong to the appropriate interface.
Under Interface 1, enter the following details:
Network settings
Details
Port Layout
Select
Two port 25 gigabit
Under
Port 1, click
Choose Networks to open
Interface 1 Port 1 Network Configuration window.
Select the checkboxes for the following networks:
Selected networks
Description
powerflex-data2-<vlanid >
Powerflex-Data2
powerflex-data4-<vlanid > (if required)
Powerflex-Data4
Powerflex-mgmt-<vlanid >
Powerflex-Management
powerflex-prod-<vlanid>
Production Network
Click
>> to add the selected networks to the right column and click
Save.
Under
Port 2, click
Choose Networks to open
Interface 1 Port 2 Network Configuration window.
Select the checkboxes for the following networks:
Selected networks
Description
powerflex-data1-<vlanid >
Powerflex-Data1
powerflex-data3-<vlanid > (if required)
Powerflex-Data3
Click
>> to add the selected networks to the right column and click
Save.
Click
Add New Interface to create the first interface.
Under Interface 2, enter the following details:
Hardware settings
Details
Port Layout
Select
Two port 25 gigabit
Under
Port 2, click
Choose Networks to open
Interface 2 Port 1 Network Configuration window.
Select the checkboxes for the following networks:
Selected networks
Description
powerflex-data2-<vlanid >
Powerflex-Data2
powerflex-data4-<vlanid > (if required)
Powerflex-Data4
Powerflex-mgmt-<vlanid >
Powerflex-Management
pxe-<vlanid>
PXE Network
Click
>> to add the selected networks to the right column and click
Save.
Under
Port 2, click
Choose Networks to open
Interface 2 Port 2 Network Configuration window.
Select the checkboxes for the following networks:
Selected networks
Description
powerflex-data1-<vlanid >
Powerflex-Data1
powerflex-data3-<vlanid > (if required)
Powerflex-Data3
Click
>> to add the selected networks to the right column and click
Save.
Click
Validate Settings, if there are any errors, correct them and click
Close.
Click
Save to complete the clone creation.
Create the cluster.
Click
Add Cluster.
Click
Component Name > PowerFlex Cluster.
Select
Associate All or
Associate Selected.
Click
Continue.
Under
PowerFlex Settings, enter the details within the following table:
PowerFlex settings
Details
Target PowerFlex Gateway
Select <
New Target PowerFlex Gateway VM >
Click
Save.
In the
Template Information box, click
Publish Template.
In the pop-up, click
Yes.
On the
Storage Template page, under
Template Information, click
Deploy and select the following:
Deploy settings
Details
Select published template
Select
<Current Name of Template>.
Service name
Enter <
Service Name >.
Service description
Enter <
Service Description >.
Firmware and software compliance
Select the
latest Intelligent Catalog version from list.
Who should have access to the service deployed from this template
Select from the list who should have access to this service template.
Click
Next to
Deployment setting page.
NOTE:For a multi-VLAN or multi-subnet configuration, it is required to manually enter the IP address of one or more network types (PowerFlex management, PowerFlex replication) for each
PowerFlex node. This is required since
PowerFlex Manager is not aware of the rack or row location of the hypervisor host. Each rack or row have a different subnet for one or more of the network types.
Validate the settings and click
Next to
Schedule Deployment page.
Leave default to
Deploy Now.
Click
Next.
Verify the summary page and click
Finish.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\