Dell PowerFlex Appliance with PowerFlex 3.x Administration Guide

Adding a network to the deployed service using PowerFlex Manager

Use this procedure to add a network to the deployed service using PowerFlex Manager.

1. Log in to PowerFlex Manager.
2. From the menu, click Services.
3. Select a service for which you want to add a network and in the right pane, click View Details.
4. Under Resource Action, from the Add Resources list, click Add Network.
   The Add Network window is displayed. All used resources and networks are displayed under Resource Name and Networks.
5. From the Available Networks list, select the network, and click Add.
   The selected network is displayed under Network Name. You can define a new network by clicking Define a new network and select check box to configure Static IP Ranges.

   Name	Description	Network Type	VLAN ID	Gateway	Primary DNS	Starting IP address	Ending IP address
   app10	Customer Applications_1	General Purpose LAN	10	192.168.10.254	192.168.200.101	192.168.10.1	192.168.10.10
6. Select Port Group from the Select Port Group list.
   NOTE:Select New Port group to create a port group for the newly defined network.
7. Click Save.
   It may take about 15 minutes for PowerFlex Manager to complete the actions of adding the VLAN to the access switches and the VMware ESXi cluster.

   NOTE:PowerFlex Manager supports scale up to 400 general-purpose LAN networks.