This section provides the PowerFlex Manager 4.0.x compatibility details for PowerFlex appliance components.
Component | Compatibility |
---|---|
Nodes |
PowerFlex R650/R750 (hyperconverged, storage-only, and compute-only) PowerFlex R6525 (compute-only) PowerFlex R640/R740xd (hyperconverged, storage-only, and compute-only) PowerFlex R840 (hyperconverged and compute-only) PowerFlex R650 (management controller) PowerFlex R650 (PowerFlex file) PowerFlex R650 (VMware NSX-T Edge) |
Operating system/hypervisor |
VMware ESXi-7.0U3G (management controller) VMware-VCSA-all-7.0 3h (management controller) VMware-ESXi-7.0U3G (hyperconverged and compute-only) Embedded operating system 15 SP3 (storage-only) Embedded operating system 15 SP3 (compute-only) PowerFlex Manager support for PowerFlex appliance with operating systems that are provided by customer is limited to installation only and no update. |
Adapters |
Mellanox ConnectX-5 OCP/PCIe Mellanox ConnectX-6 DX Intel X710/I350 rNDC Mellanox ConnectX-4 rNDC Mellanox ConnectX-4/ConnectX-5 Broadcom 57414 V1 2x25 OCP Broadcom 57414 V2 2x25 Broadcom 57414 V1 2x25 |
Networking |
Deployment requires a pair of the following switches:
After deploying,
PowerFlex Manager can monitor and update the following access Dell switches:
**Clusters of 10 or fewer nodes. |
Storage | PowerFlex 4.0.1 |
Security |
CloudLink 7.1.5 |
Compliance |
Intelligent Catalog 40.371.00 |